Direkt zum Inhalt der Seite Direkt zur Hauptnavigation
 
 

BS EN 1158

BS EN 1158:1997 – Door co-ordinator devices

BS EN 1158:1997 – Door co-ordinator devices

This European standard specifies requirements for both separately mounted devices and mechanisms incorporated in door closers. There are additional requirements for devices for use on fire/smoke door assemblies.
BS EN 1158:1997 classifies door furniture by using a 6-digit coding system.

 

Digit 1 – Category of use
Only one category is identified:
Grade 3: for all internal and external doors for use by the public, and others, with little incentive to take care, i.e. where there is some chance of misuse of the door

 

Digit 2 – Number of test cycles
Two test durations are identified:
Grade 5: 50,000 test cycles, for all other door coordinator devices
Grade 8: 500,000 test cycles, for door coordinator devices incorporated in, or for use in conjunction with, automatic swing door operators, and for devices incorporated in a door closer

 

Digit 3 – Test door mass/size
Five door mass grades and related coordinator sizes are identified according to table 1 of this European standard.

Door Co-ordinator Size

Test Door Leaf Mass

Recommended door leaf width max. mm

Distance between hinge centrelines max. mm

3

60

950

1,900

4

80

1,100

2,200

5

100

1,250

2,500

6

120

1,400

2,800

7

160

1,600

3,200

 
Digit 4 – Fire resistance
Two grades of fire resistance are identified for door coordinator devices manufactured to this European standard:
Grade 0: not suitable for use on fire/smoke door assemblies
Grade 1: suitable for use on fire/smoke door assemblies, subject to satisfactory assessment of the contribution of the door coordinator device to the fire resistance of specified fire/smoke door assemblies

 

Digit 5 – Safety
All door coordinator devices are required to satisfy the essential requirement of safety in use. Therefore, only grade 1 is identified.

 

Digit 6 – Corrosion resistance
Five grades of corrosion resistance are identified in accordance with BS EN 1670:2007:
Grade 0: no defined corrosion resistance
Grade 1: mild resistance
Grade 2: moderate resistance
Grade 3: high resistance
Grade 4: very high resistance

 

Sources:
Door and Hardware Federation (DHF) Best Practice Guide – Door co-ordinator devices – BS EN 1158