Direkt zum Inhalt der Seite Direkt zur Hauptnavigation
 
 

HOPPE News

 What you need to know about door closers in halls of residence

 

In this article, Rob Adams, Technical Manager for ARRONE, shares best practice guidance for making sure door closers in student halls of residence comply with the latest safety standards.

Door closers play an integral part in making sure doors open and close effectively. In the event of a fire, a firmly closed fire door helps to slow down the effects of flames and smoke, with the Government stating that: ‘Fire doors are one of the most important measures to safeguard the means of escape from fire.’

Fire prevention within halls of residence is widely recognised as being a key responsibility for universities, with new legislation, The Fire Safety (England) Regulations 2022, being introduced on 23 January 2023.

The regulations are an important step in actioning the recommendations made in the Grenfell Tower Inquiry Phase One report and have been implemented under Article 24 of the Regulatory Reform (Fire Safety) Order 2005 (Fire Safety Order).

All responsible persons working in multi-occupied, multi-storey buildings over 11 metres tall are legally required to conduct quarterly checks of all fire doors within communal areas and, on a best endeavour basis, annual checks of all entrance doors leading on to communal areas.

The checks apply to self-closing doors and cover every aspect of fire and entrance doors, including the essential hardware: hinges, locks or latches and door closers.

Guidance published by the Government states that the checks should consider:

  • If there have been any alterations or damage to a fire door’s glazing apertures or air transfer grille
  • If there are any gaps around the door frame and that seals and hinges are fitted correctly
  • That the door closer shuts the fire door
  • That the fire door closes correctly around the whole frame
  • That there is no visible damage to the door or door closer
ARRONE Door Closer AR6409

Responsible Persons should also: inform students about the importance of keeping fire doors closed at all times; ask them not to tamper with the doors and notify them about what to do if any of the doors are faulty or damaged in any way.

Fire doors should not be wedged open under any circumstances. If a door must be kept open, for instance, because it is in a high traffic area, then the use of an overhead electromagnetic door closing device would provide an acceptable and safe solution. This is a product type that will ensure the door is held open and automatically closes the door when the fire alarm is triggered, all in accordance with fire safety and legal requirements.

The importance of inspecting closers

Fire doors are designed to prevent the spread of fire and smoke, creating time for students to evacuate the building. As is the case with all fire safety measures, it is essential that fire and entrance doors and the associated hardware, particularly the door closers, are kept in good working order.

Regular inspections, as stipulated by the new regulations, play an important role in making sure wear and tear that may lead to defects are immediately detected and repaired.

Door closer inspection best practice

The following guidance is aimed at making sure all responsible persons with a duty to conduct fire door and entrance door checks within halls of residence carry out robust inspections of their door closers.

This involves asking themselves the following key questions:

  • Is the closer fitted in the correct position? Is it still attached correctly to the door and frame or has it become loose or dropped?
  • Has it been damaged in any way?
  • Does it allow the door to open smoothly?
  • Does it close the door in a controlled manner?
  • Are all of the screws and other fixings still tightly in place?
  • Are there signs of fluid on the outside of the door closer or on the face of the door?
ARRONE Door Closer AR1500

The impact of faulty door closers on doors

When a door closer doesn’t function properly, it directly impacts the performance of the fire door it has been fitted to. For instance, in the door opening too slowly or closing too quickly or only partially opening and closing, rendering it less effective in the event of a fire.

More specifically, faulty door closers can result in doors:

  • Not easily opening by up to at least 70 degrees
  • Not latching correctly when opened to 5 degrees or 75mm
  • Taking too long to close – within 25 seconds is considered best practice
ARRONE Door Closer AR1998

Door closers are essential for making sure fire and entrance doors are fully functional and, more important, ensuring fires are contained as much as possible within halls of residence to ensure the safety of their occupants.

To learn more about fire door hardware, book a CPD presentation by contacting Andy Matthews, head of sales at HOPPE (UK), at [email protected] or 01902 484 439.