Standards

Standards are important sets of rules setting benchmarks. Among other things, they provide a basis for comparison for an often vast range of products. HOPPE products correspond to the requirements of various standards.
writeCache 17/ca/34/26/b7/8f/page-content-500-ca3426b78fd88d1721fe3158baa595f7.cache :: 2024-01-30 12:36:18 -- 27.04.24 23:21:39 : keine gültige Cachedatei gefunden
DIN EN 1906 – European and German Standardisation for Hardware

DIN EN 1906 – European and German Standardisation for Hardware

For the purposes of European standardisation, DIN EN 1906 has been introduced to specify requirements and test methods for door handles and door knobs. It was adopted on European level in October 2001, has been revised several times and is currently valid as EN 1906 – December 2012 issue.

DIN 18257 and RAL-GZ 607/6 för skyddsbeslag

DIN 18257 and RAL-GZ 607/6 för skyddsbeslag

These regulations determine the terms, dimensions and tightened requirements as well as testing procedures for security hardware corresponding to the increased demands of the user and as a result of many years of police experience.

DIN 18273 for Fire-resistant and Smoke Doors

DIN 18273 for Fire-resistant and Smoke Doors

Fire-resistant handle sets must be manufactured according to the requirements of DIN 18273. This standard is valid for all fire-resistant door sets used in fire-resistant and smoke doors.

DIN EN 179 for Emergency Exit Devices

DIN EN 179 for Emergency Exit Devices

European standard DIN EN 179 for emergency exit devices has been in force since June 2002 and was revised in 2008. It defines the requirements and testing procedures, and provides firm recommendations for their application.

DIN EN 1125 for Panic Devices

DIN EN 1125 for Panic Devices

European standard DIN EN 1125 for panic devices has been in force since June 2002 and was revised in 2008. It defines the requirements and testing procedures, and provides firm recommendations for their application.

DIN EN 13126-3, DIN 18267 and RAL-GZ 607/9 for Windows and French Doors

DIN EN 13126-3, DIN 18267 and RAL-GZ 607/9 for Windows and French Doors

European standard DIN EN 13126 concerns architectural fittings for windows and French doors. Part 3 of this series of standards specifies requirements and test methods for operating handles, in particular for turn-tilt, tilt-turn and turn-only fittings.

Security handle HOPPE 93S for French doors

Security handle HOPPE 93S for French doors

The lockable 93S aluminium security handle offers additional burglary protection for balcony doors and French doors. It is mounted on the inside and is a visible deterrent for potential burglars. They can see in advance that they cannot easily leave the house or apartment via this door.

endCache 17/ca/34/26/b7/8f/page-content-500-ca3426b78fd88d1721fe3158baa595f7.cache