DIN EN 13126-3, DIN 18267 and RAL-GZ 607/9

European standard DIN EN 13126 concerns architectural fittings for windows and French doors. Part 3 of this series of standards specifies requirements and test methods for operating handles, in particular for turn-tilt, tilt-turn and turn-only fittings.
HOPPE – Handle of excellence.
readCache 17/c8/1c/87/page-content-3383-c81c87e50b51b4e88142dffe7b1c49a9.cache :: Cachedatei: 2024-01-29 12:15:18 -- 28.03.24 21:52:47 | Seite geändert: 2024-01-29 12:15:18 -- 29.01.24 13:15:18 | gültige Cachedatei gefunden

DIN EN 13126-3 for window handles

Two categories of use for handles were defined for the first digit of the classification key, taking into account the various quality levels in Europe. The superior grade 2 reflects the tried-and-tested product properties of existing RAL window handles. The seventh digit defines three security grades for lockable window handles. They were designed in such way to match the requirements of the European burglar resistance standard DIN EN 1627.

The European standard DIN EN 13126 does not stipulate any requirements in terms of window handle dimensions. These requirements are defined in DIN 18267 (e.g., square spindle □ 7 mm, screw fixing distance 43 mm).

The revised DIN EN 13126-3 also forms the basis for the revised quality guideline RAL-GZ 607/9 (September 2012 edition). As a minimum requirement, the window handles must meet grade 2 of category of use, lockable window handles grade 2 or 3 in the security category. Additionally, RAL-GZ 607/9 uses the following classifications:

Category of use grade 2 (3, 4) to DIN EN 1906
RAL-GZ 607/9

RAL

Window handles with RAL-compatible click mechanism, min. 10,000 tilt and turn cycles, min. 48 h corrosion resistance in salt spray test.

RAL minimum requirements in accordance with DIN EN 13126-3:

Category of use2
Durability3/180
Mass
Fire resistance0
Safety in use1
Corrosion resistance2
Security0/0
ApplicationC1
Test size

SecuForte®

Category of use2
Durability3/180
Mass
Fire resistance0
Safety in use1
Corrosion resistance3
Security1/1
Application3/C1
Test size

RAL100

Keyed or non-keyed lockable window handle with RAL-compatible click mechanism, min. 10,000 tilt and turn cycles, min. 48 h corrosion resistance in salt spray test, 100 Nm resistance against forceful turning and pulling, non-keyed locking mechanism or keyed locking mechanism with at least 100 possible locking variations.

RAL100 – minimum classification in accordance with DIN EN 13126-3:

Category of use22
Durability3/1803/180
Mass
Fire resistance00
Safety in use11
Corrosion resistance22
Security2/1 *2/3 **
ApplicationC1C1
Test size

* Non-keyed locking mechanism
** Keyed locking mechanism

RAL200

Keyed or non-keyed lockable window handle with RAL-compatible click mechanism, min. 10,000 tilt and turn cycles, min. 48 h corrosion resistance in salt spray test, 200 Nm resistance against forceful turning and pulling, non-keyed locking mechanism or keyed locking mechanism with at least 100 possible locking variations.

RAL200 – minimum classification in accordance with DIN EN 13126-3:

Category of use22
Durability3/1803/180
Mass
Fire resistance00
Safety in use11
Corrosion resistance22
Security3/1 *3/3 **
ApplicationC1C1
Test size

* Non-keyed locking mechanism
** Keyed locking mechanism

Obtaining the RAL Quality Mark requires compliance with the minimum requirements defined in accordance with DIN EN 13126-3, constant internal and external supervision by a recognised test institute. This ensures a consistently high level of quality. The classification key in DIN EN 13126-3 is explained here.

HOPPE window handles with RAL

HOPPE window handles based on U10, U26, U34 rosettes and Secustik® rosettes US10, US944, US945, US947, US952, US954, US956, USV919, MUS918, MUS920, MUS937, MUS943 are tested to DIN EN 13126-3, meet the dimensional requirements of DIN 18267 and fulfil the quality and test specifications of RAL-GZ 607/9.

HOPPE window handles with RAL100

The Secu100® and Secu100® + Secustik® lockable window handles meet the dimensional requirements of DIN 18267 and are suitable for use in burglary-resistant windows meeting resistance classes RC1 to RC6 of DIN EN 1627 and fulfil the quality and test specifications of RAL-GZ 607/9.

HOPPE window handles with RAL200

The Secu200® lockable window handles meet the dimensional requirements of DIN 18267 and are suitable for use in burglary-resistant windows meeting resistance classes RC1 to RC6 of DIN EN 1627 and fulfil the quality and test specifications of RAL-GZ 607/9.

endCache 17/c8/1c/87/page-content-3383-c81c87e50b51b4e88142dffe7b1c49a9.cache